What is Your Coolant Reservoir For?

#driveyourlife

coolant reservoirIf your car’s coolant reservoir is a mystery to you, you’re not alone. When you pop the hood of your car you may see a bunch of things you recognize and understand or you may see a maze of wires and hoses and have no idea what you’re looking at.  If you identify with the latter, don’t worry you’re in good company.  Even the most seasoned of mechanics tend to specialize in a particular type of vehicle or even a particular year range and if you present them with a vehicle they’re not familiar with, they can be just as confused as the average car owner.

Every vehicle has the same basic purpose, to get you from point A to point B reliably and at least somewhat comfortably.  The reality is, there is an endless number of different ways you can accomplish this task.  This is even more evident today with the introduction of hybrid and electric vehicles that look completely different from any vehicles produced before them.

This is still true even when you consider smaller systems in your car like the power steering system.  Your car can assist steering with a hydraulic system or an electric system and that system can get your tires to turn using a steering gear or a rack and pinion and the geometry and placement of this system can be in many different places depending on the design of your car and where the engine and transmission are located.

What is the purpose of a cooling system?

One of the things that every vehicle needs is a cooling system.  The cooling system in your vehicle removes waste heat created by the combustion process to keep the metals in your engine at a safe temperature so that it can operate for hours at a time without any damage.  Your cooling system is filled with special coolant that is a mixture of water and chemicals that keep it from freezing, help lubricate the system, prevent corrosion and aid in heat transfer.  This coolant is pumped through the system using a water pump which is either electric or powered by your engine via a belt and pulley.  Your vehicle will also have a thermostat and radiator which regulate the temperature of the coolant in your engine by sending more or less coolant through the radiator to be cooled based on your engine temperature.

coolant reservoirOne of the functions of your cooling system that you may not think much about is to maintain a constant pressure.  Like most things, as your coolant heats up as you start driving, it will expand.  If your system is completely full of coolant this expansion will cause a rapid rise in pressure.  Your radiator cap is designed to keep that pressure under a certain point to keep things from leaking and your cooling hoses popping off or bursting at a high pressure.  Once your system reaches operating pressure, the radiator cap will allow coolant to flow past it into the coolant reservoir maintaining the proper pressure.  Then once you’ve stopped and your engine starts to cool, the opposite happens.  As the temperature goes down and your coolant contracts, it creates a vacuum that can draw coolant back in through the radiator cap making sure your cooling system always stays full of coolant and has no air bubbles.

What is the coolant reservoir’s role in the cooling system?

Your coolant reservoir serves a very important role in your cooling system as it keeps your system full and free of air bubbles so it can operate at its full potential.  Your coolant reservoir is also the first place you’ll be able to notice a leak.  If coolant is leaking from your system, you’ll notice that even when your car is warm, the level won’t get quite as high in the reservoir.  If you notice this happening in your car, make sure to keep your coolant reservoir topped off to avoid air being introduced into your cooling system.  Also, take some time to identify your leak location and fix it quickly so you can get back to operating your vehicle safely.  If you notice you have a slow head gasket leak, you can use BlueDevil Pour-N-Go to seal the leak and solve your cooling system problems quickly and easily.

BlueDevil Pour-N-Go Head Gasket Sealer

For more information on BlueDevil Pour-N-Go Leak Sealer, visit our product information page here: Pour-N-Go

You can purchase BlueDevil Pour-N-Go at any of our partnering local auto parts stores like:

  • AutoZone
  • Advance Auto Parts
  • Bennett Auto Supply
  • CarQuest Auto parts
  • NAPA Auto Parts
  • O’Reilly Auto Parts
  • Pep Boys
  • Fast Track
  • Bumper to Bumper Auto Parts Specialists
  • S&E Quick Lube Distributer
  • DYK Automotive

 

Pictures Provided By:

coolant_reservoir.jpg – By Thinkstock – Licensed by Thinkstock Photos – Original Link
full_reservoir.jpg – By MG_54.jpg – Licensed by Thinkstock Photos – Original Link

 

BlueDevil Products can be found on Amazon.com or at AutoZone, Advance Auto Parts, O’Reilly Auto Parts, NAPA, and other major auto parts retailers.

11 responses to "What is Your Coolant Reservoir For?"

11 Comments

  1. Machanicman on January 13, 2016 at 3:58 pm

    I use a long flexible brush like the one thats made to clean under refrigider bend the end into a a J like shape and adjust to fit and bend to get angle to clean the sides, Disconect the hose to radiator neck and collect antifreeze if you did not drain radiator first.

  2. Rick Candelaria on November 9, 2019 at 2:59 pm

    I accidentally put about 1/4 of the bottle of BlueDevil into my Overflow Reservoir can you give me your advice as what to do?

    • BlueDevil Pro on November 11, 2019 at 9:26 am

      Rick-

      Did you start the vehicle after you added the product into the reservoir? Please contact our technical support line at 888-863-0426 so that we can get a little better understanding of the vehicle’s condition and be able to make any appropriate recommendations.

      Thank you!

      -BDP

    • Laura on October 28, 2020 at 9:07 pm

      My son pored the entire 16 oz bottle into The overflow reservoir and ran the car about an hour. I can see on the otter is says do not put in the reservoir. What do you suggest we do

      • BlueDevil Pro on October 29, 2020 at 8:16 am

        Laura-

        Is the vehicle still experiencing a blown/leaking head gasket? Please contact our technical support line at 888-863-0426 so that we can get a little better understanding of the vehicle’s condition and be able to make any appropriate recommendations.

        Thank you!

        -BDP

  3. John on June 6, 2020 at 1:44 pm

    Hi there..

    Is it possible that the coolant reservoir is pressurised by vacume? And if it is pressured by vac that if haveing a hole in the reservoir cap can cause air to get into the cooling system?

    Is this possible? I have a hole in my res cap and just wandering if thats whats causing my idle surge and stalling like a vacume leak would do?

    • BlueDevil Pro on June 8, 2020 at 11:41 am

      John-

      You are correct. A reservoir cap that has a hole in it would allow air to get into the system and could cause the symptoms you’ve described. We recommend bleeding the system to get rid of the excess air and replacing the reservoir cap. This should correct the problem.

      Thank you!

      -BDP

  4. Leo Cameron on December 12, 2020 at 5:30 pm

    What is the function of the 2 top expansion hoses on the coolant reservoir in my 2015 Ford Escape. I’m replacing the reservoir. When I removed the right top hose, I noticed that part of the end had broken off and remained just inside the protruding entrance. Can I buy a new ending or does the whole hose need replacing. Many thanks for some advice.

    • BD Auto Pro on December 15, 2020 at 6:18 pm

      Leo,

      Thanks for your question about your 2015 Escape. The hoses are to maintain coolant pressure around your cooling system so they need to be tightly connected to your new coolant reservoir. On many vehicles, if the plastic end of the hose breaks off you need to replace the whole hose. You will need to inspect your new coolant reservoir and maybe even contact a Ford parts department to know for sure, but our guess is the hose will need to replace the entire hose.

      Thanks again for your question!
      -BD Auto Pro

  5. Coolant tank on September 29, 2021 at 1:52 am

    I recently changed my reservoir bottle cause it had a leak bt ever since i changed it my engine and then reservoir tank are hot bt the fans does kick in.. When i do start it fails now and again .. Please help

    • BlueDevil Pro on September 29, 2021 at 8:16 am

      Coolant tank-

      Have you attempted to bleed/burp the system to remove any air pockets? Is it failing because it’s stalling out or is it overheating and shutting off? Please contact our technical support line at 888-863-0426 so that we can get a little better understanding of the vehicle’s condition and be able to make any appropriate recommendations.

      Thank you!

      -BDP

Leave a Reply





Related Articles

Search Blog

Subscribe

Blog Categories